Hot-selling Engine Oil Company - Petroking Anti-Wear Hydraulic Oil #68 – PETROKING
Hot-selling Engine Oil Company - Petroking Anti-Wear Hydraulic Oil #68 – PETROKING Detail:
Features & Benefits
The exceptional repair function,significantly reduce the vibration,repair wear,reduce the number of maintenance;
The super anti-wear,oxidation stability,anti-corrosion rust,slow down the hydraulic pump and value wear,extend the service life;
The unique CHT5 active nano-particle material anti-wear agent,can reduce the energy transfer of liquid energy loss,improve power;
The to ensure that the hydraulic system at a low temperature has a good cold start type and pumping;
The good rubber applicability,effective protection of sealing materials,to prevent leakage;
Typical Properties
|
Item |
ANTI-WEAR HYDRAULIC OIL |
|
ISO Viscosity grade |
68 |
|
Kinematic Viscosity@ 40C, mm2/s, ASTM D445 |
68.16 |
|
Kinematic Viscosity@ 100C, mm2/s, ASTM D445 |
8.83 |
|
Viscosity Index, ASTM D2270 |
103 |
|
Air release at 50℃,mins,ASTM D 3427 |
8 |
|
Foaming characteristics,sequences 1,2 and 3, ASTM D 892 |
15/0;10/0;15/0 |
|
Neutralisation number,mg KOH/g,ASTM D 974 |
0.71 |
|
FZG test(A/8.3/90), fail load stage,DIN 51345 |
12 |
|
Rust prevention,ASTM D 665 |
– |
|
Distilled water |
Pass |
|
Synthetic sea water |
Pass |
|
Copper corrosion,3 hours@100℃,ASTM D 130 |
1b |
|
Water separability,ASTM D 2711 |
13(54℃) |
|
Pour Point,℃, ASTM D97 |
-14 |
|
Flash point (COC),℃，ASTM D92 |
234 |
Product detail pictures:
Related Product Guide:
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Hot-selling Engine Oil Company - Petroking Anti-Wear Hydraulic Oil #68 – PETROKING , The product will supply to all over the world, such as: Brisbane, Cambodia, Roman, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Gail from French - 2017.01.28 19:59
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By ROGER Rivkin from British - 2017.03.07 13:42
