bdfgffd

news

Drawing on the company’s 34 years of experience developing industry-leading synthetic greases, the five-point plan offers practical advice that can help to eliminate equipment failure and unscheduled downtime.

1. Choose the right grease for the application

Greases have varying priorities to ensure that they can best operate under certain conditions.

To select the right grease, it is essential to consider the conditions under which the bearing will operate – think about machine speed, load level, ambient temperature and the type and size of bearing.

 

2. Select the right base oil viscosity

When selecting a grease, consider the base oil viscosity. This viscosity should be appropriate for the load and speed of the application at operating temperature and will help to ensure maximum protection and component life. Greases formulated using a higher viscosity base oil are usually more water resistant and are suited to heavy-duty or high-temperature applications. Greases with a lower viscosity base oil can help to enhance the protection at low temperatures.

 

3. Do not over-grease or under-grease

Incorrect application and over-greasing is the cause of over 90 per cent of costly bearing failures. In addition to bearing failures, it can also lead to problems due to migration of the lubricant into the windings of motors. Typically, a bearing should never be more than two-thirds full of grease, leaving one third air space to allow for optimal operation. Likewise, insufficient grease could lead to bearing failure due to lack of lubrication.

 

4. Avoid incompatibility

Ahead of applying a new grease, thoroughly clean – or flush out – the previous grease from the bearing. This avoids compatibility issues and helps ensure that the new grease can perform at an optimum level.

 

5. Consider using greases with synthetic base oils

When compared to a mineral base oil, grease formulated using a synthetic base oil can offer enhanced oxidation resistance, and a higher lubrication film thickness – ensuring continued performance and protection even in high temperatures. In addition, synthetic base oils have the potential to contribute to reduced energy consumption as a result of reduced friction.


Post time: Jul-11-2023