Greasing bearings is an essential maintenance task that helps to keep them running smoothly and efficiently. Here’s a step-by-step guide on how to apply grease to bearings:

1. Gather your materials: You will need a clean rag, a can of grease, and a grease gun.
2. Clean the bearings: Before applying new grease, it’s important to clean the old grease and dirt from the bearings. Use a clean rag to wipe away any debris.
3. Apply grease: Load the grease gun with the appropriate type of grease for your bearings. Then, place the tip of the grease gun onto the fitting on the bearing and pump the grease in. Be careful not to overfill the bearings, as this can cause damage.
4. Distribute the grease: After you have pumped the grease into the bearing, rotate the bearing to help spread the grease evenly throughout the bearing.
5. Wipe away excess grease: Once the bearing is properly greased, wipe away any excess grease with a clean rag.
6. Test the bearing: After greasing, it’s important to test the bearing to ensure it is running smoothly.

By following these steps, you can ensure that your bearings are properly lubricated and functioning at their best. Regular greasing will help to prolong the life of your bearings and prevent premature wear and tear.